#!/bin/bash
#
# Copyright 2006, 2011  Alan Hicks, Lizella, GA
# Copyright 2010, 2011, 2013, 2014, 2015, 2016, 2017  Mario Preksavec, Zagreb, Croatia
# Copyright 2017, 2018, 2020, 2022, 2023  Patrick J. Volkerding, Sebeka, MN USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# (Thanks also to /dev/rob0 somewhere on the Internet)

cd $(dirname $0) ; CWD=$(pwd)

PKGNAM=postfix
VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
BUILD=${BUILD:-2}

if [ -z "$ARCH" ]; then
  case "$( uname -m )" in
    i?86) ARCH=i586 ;;
    arm*) ARCH=arm ;;
       *) ARCH=$( uname -m ) ;;
  esac
fi

# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
# the name of the created package would be, and then exit. This information
# could be useful to other scripts.
if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
  exit 0
fi

TMP=${TMP:-/tmp}
PKG=$TMP/package-$PKGNAM
OUTPUT=${OUTPUT:-$TMP}

if [ "$ARCH" = "i686" ]; then
  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
  LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
  LIBDIRSUFFIX="64"
elif [ "$ARCH" = "i586" ]; then
  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
  LIBDIRSUFFIX=""
else
  SLKCFLAGS=${SLKCFLAGS:-"-O2"}
  LIBDIRSUFFIX=${LIBDIRSUFFIX:-""}
fi

NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}

if [ "$(grep "^postfix:x:91:91" /etc/passwd)" = "" -o \
     "$(grep "^postfix:x:91:" /etc/group)" = "" -o \
     "$(grep "^postdrop:x:92:" /etc/group)" = "" ]; then
cat << EOF
The postfix user/group and/or the postdrop group do not exist on this system.
Before running this script, please add them with the following commands:

groupadd -g 91 postfix
useradd -u 91 -d /dev/null -s /bin/false -g postfix postfix
groupadd -g 92 postdrop

EOF
exit 1
fi

rm -rf $PKG
mkdir -p $TMP $PKG $OUTPUT
cd $TMP
rm -rf $PKGNAM-$VERSION
tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
cd $PKGNAM-$VERSION || exit 1

chown -R root:root .
find -L . \
 \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
  -o -perm 511 \) -exec chmod 755 {} \+ -o \
 \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \+

# Fix postfix-script so that it won't think a symlink in /etc/postfix is
# group writable. Only warn about regular files there.
zcat $CWD/postfix.only.warn.regular.files.diff.gz | patch -p1 --verbose || exit 1

# Make the postfix startup message look more like the other boot notices:
zcat $CWD/postfix.script.starting.message.diff.gz | patch -p1 --verbose || exit 1

# According to the OpenSSL migration guide:
# "OpenSSL versions with the same major number are API and ABI compatible. If
# the major number changes then API and ABI compatibility is not guaranteed."
# So, stop filling the logs with this when upstream says it's fine.
zcat $CWD/0001-openssl-micro-mismatch-nowarn.patch.gz | patch -p1 --verbose || exit 1

# Postfix does not use a ./configure script (no GNU autoconf)
#
# The AUXLIBS variable is for dynamic library linking, which as of this
# writing is the only means of adding SASL and TLS support.  But most map
# types now can be loaded as plugins at runtime.  We build our Postfix
# package with LDAP, MySQL, PCRE and sqlite3 plugins.  In addition,
# Berkeley DB support (required) is automatically detected and built.

# Build with SASL support
SASLARGS="-DUSE_SASL_AUTH -I/usr/include/sasl -DUSE_CYRUS_SASL"
SASLLIBS="-L/usr/lib${LIBDIRSUFFIX}/sasl2 -lsasl2"
# Note: this enables both server SASL types (Cyrus and Dovecot) as well as
# client SASL with Cyrus.  See SASL_README if you wish to customize this.
# For example, you might not wish to link against Cyrus SASL if not using
# client SASL.  For Dovecot (server) SASL only, comment SASLLIBS, and set:
# SASLARGS="-DUSE_SASL_AUTH"

# Build with TLS support, see TLS_README
TLSARGS="-DUSE_TLS"
TLSLIBS="-lssl -lcrypto"

# Build with LDAP client support, see LDAP_README
LDAPARGS="-DHAS_LDAP"
# MySQL database support, see MYSQL_README
MYSQLARGS="-I/usr/include/mysql -DHAS_MYSQL"
# PCRE (perl-compatible regular expressions) support, see PCRE_README
PCREARGS="-DHAS_PCRE $( pcre-config --cflags )"
# SQLite3 database support, see SQLITE_README
SQLITEARGS="-DHAS_SQLITE"
# Finally, DBARGS lumps it all together:
DBARGS="$LDAPARGS $MYSQLARGS $PCREARGS $SQLITEARGS"

### ADDITIONAL MAP TYPE PLUGINS
#
# Those who have installed other map types not included in Slackware could
# add support as follows:
#
#  * AUXLIBS_CDB for CDB support, see /usr/doc/postfix/readme/CDB_README
#  * AUXLIBS_LMDB for LMDB support, see /usr/doc/postfix/readme/LMDB_README
#  * AUXLIBS_PGSQL for PostgreSQL support, see /usr/doc/postfix/readme/PGSQL_README
#  * AUXLIBS_SDBM for SDBM support, see /usr/doc/postfix/readme/SDBM_README
#
# Note that each of these additional map types will require additions to
# the CCARGS variable.  Typically this would be done by adding what is
# needed to $DBARGS.

### CHANGING BUILT-IN DOCUMENTATION PATH SETTINGS
#
# If we try to use postfix-$VERSION in any of these paths, we'll get a compile
# failure: "error: too many decimal points in number"
# So we're pretty much forced to leave things as postfix expects them.
PATHARGS="'-DDEF_HTML_DIR=\"/usr/doc/postfix/html\"' \
  '-DDEF_MANPAGE_DIR=\"/usr/man\"' \
  '-DDEF_README_DIR=\"/usr/doc/postfix/readme\"'"

make $NUMJOBS makefiles dynamicmaps=yes pie=yes shared=yes \
  shlib_directory=/usr/lib${LIBDIRSUFFIX}/postfix/MAIL_VERSION \
  CCARGS="$TLSARGS $SASLARGS $DBARGS $PATHARGS" \
  AUXLIBS="$TLSLIBS $SASLLIBS" \
  AUXLIBS_LDAP="-lldap -llber" \
  AUXLIBS_MYSQL="-L/usr/lib${LIBDIRSUFFIX}/mysql -lmysqlclient -lz -lm" \
  AUXLIBS_PCRE="$( pcre-config --libs )" \
  AUXLIBS_SQLITE="-lsqlite3 -lpthread" \
  OPT="$SLKCFLAGS" DEBUG="" || exit 1

# We put our documentation files in version-specific directories, but we'll
# use a symlink to provide the compiled-in path in /usr/doc/postfix/.
mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
ln -s $PKGNAM-$VERSION $PKG/usr/doc/$PKGNAM

make $NUMJOBS non-interactive-package \
  install_root=$PKG \
  tempdir=$TMP/$PKGNAM-temp \
  sample_directory=no || exit 1

rm -f $PKG/etc/postfix/{TLS_,}LICENSE

install -D -m 0644 -oroot -groot $CWD/rc.postfix $PKG/etc/rc.d/rc.postfix.new

# Add greylist.pl per postfix documentation:
cp -a examples/smtpd-policy/greylist.pl $PKG/usr/libexec/postfix
chown root:root $PKG/usr/libexec/postfix/greylist.pl
chmod 755 $PKG/usr/libexec/postfix/greylist.pl

# Add some additional tools:
install -m 0755 -oroot -groot bin/posttls-finger $PKG/usr/bin/ || exit 1
install -m 0644 -oroot -groot man/man1/posttls-finger.1 $PKG/usr/man/man1/ || exit 1
install -m 0644 -oroot -groot html/posttls-finger.1.html $PKG/usr/doc/$PKGNAM-$VERSION/html/ || exit 1
install -m 0755 -oroot -groot auxiliary/qshape/qshape.pl $PKG/usr/bin/ || exit 1
install -m 0644 -oroot -groot man/man1/qshape.1 $PKG/usr/man/man1/ || exit 1
install -m 0644 -oroot -groot html/qshape.1.html $PKG/usr/doc/$PKGNAM-$VERSION/html/ || exit 1
install -m 0755 -oroot -groot auxiliary/collate/collate.pl $PKG/usr/bin/ || exit 1
cp -a auxiliary/collate/README $PKG/usr/doc/$PKGNAM-$VERSION/readme/README.collate || exit 1
install -m 0755 -oroot -groot bin/{smtp,qmqp}-{source,sink} $PKG/usr/sbin/ || exit 1
install -m 0644 -oroot -groot man/man1/{smtp,qmqp}-{source,sink}.1 $PKG/usr/man/man1/ || exit 1

# Move configuration files to filename.new:
find $PKG/etc/postfix -type f ! -name "*.default" ! -name "*.proto" ! -name "*.out" \
  ! -name "postfix-files" -exec mv {} {}.new \;

# The aliases file is expected to be in /etc, so let's put it there:
mv $PKG/etc/postfix/aliases.new $PKG/etc/aliases.new
# Leave a symlink in /etc/postfix to point out this location:
( cd $PKG/etc/postfix ; ln -sf ../aliases . )

# Strip binaries:
find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true

# Set proper permissions:
chown root:postdrop $PKG/usr/sbin/{postdrop,postqueue}
chmod 2755 $PKG/usr/sbin/{postdrop,postqueue}
chown postfix:root $PKG/var/lib/postfix
chown -R postfix:root $PKG/var/spool/postfix/*
chown root:root $PKG/var/spool/postfix/pid
chown postfix:postdrop $PKG/var/spool/postfix/{maildrop,public}

# Compress man pages:
find $PKG/usr/man -type f -exec gzip -9 {} \+
for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done

sed -i $PKG/etc/postfix/postfix-files \
  -e 's#\($manpage_directory/man[158]/.\+\.[158]\)\(:.*\)#\1.gz\2#' \
  -e '/$config_directory\/LICENSE:f:root:-:644:1/ d' \
  -e '/$config_directory\/TLS_LICENSE:f:root:-:644:1/ d'

# Add documentation files:
mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
cp -a AAAREADME COMPATIBILITY COPYRIGHT HISTORY IPv6-ChangeLog LICENSE PORTING \
  RELEASE_NOTES* TLS_* US_PATENT_* examples implementation-notes \
  $PKG/usr/doc/$PKGNAM-$VERSION

mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc
zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh

cd $PKG
/sbin/makepkg -l y -c n --prepend $OUTPUT/$PKGNAM-$VERSION-$ARCH-$BUILD.txz