#!/bin/sh # Copyright 2008, 2009, 2010, 2012, 2013, 2015, 2016 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is # permitted provided that the following conditions are met: # # 1. Redistributions of this script must retain the above copyright # notice, this list of conditions and the following disclaimer. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO # EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, # PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; # OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # Modified 2012 by Eric Hameleers for ARM port. VERSION=${VERSION:-$(echo samba-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-2_slack14.2} if [ -e $CWD/machine.conf ]; then . $CWD/machine.conf ] elif [ -e /etc/slackbuild/machine.conf ]; then . /etc/slackbuild/machine.conf ] else # Automatically determine the architecture we're building on: if [ -z "$ARCH" ]; then case "$( uname -m )" in i?86) export ARCH=i586 ;; arm*) export ARCH=arm ;; # Unless $ARCH is already set, use uname -m for all other archs: *) export ARCH=$( uname -m ) ;; esac fi # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX: if [ "$ARCH" = "i586" ]; then SLKCFLAGS="-O2 -march=i586 -mtune=i686" LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" elif [ "$ARCH" = "aarch64" ]; then SLKCFLAGS="-O2" LIBDIRSUFFIX="64" else SLKCFLAGS=${SLKCFLAGS:-"-O2"} LIBDIRSUFFIX=${LIBDIRSUFFIX:-""} fi fi case "$ARCH" in arm*) TARGET=$ARCH-slackware-linux-gnueabi ;; *) TARGET=$ARCH-slackware-linux ;; esac CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-samba rm -rf $PKG mkdir -p $TMP $PKG if [ -r /usr/lib${LIBDIRSUFFIX}/libtalloc.so.? -a ! -r /var/log/packages/talloc* ]; then echo "The Samba package needs to be removed before building to ensure that" echo "talloc (and possibly other bundled libraries) are included in the build." echo echo "Removing the Samba package in 15 seconds, and then continuing with the build." sleep 15 removepkg samba fi cd $TMP rm -rf samba-$VERSION tar xvf $CWD/samba-$VERSION.tar.xz || exit 1 cd samba-$VERSION || exit 1 # Patch to install talloc/tevent/tdb libraries and includes: zcat $CWD/samba.install.talloc.tevent.tdb.diff.gz | patch -p1 --verbose || exit 1 # Patch some security issues: zcat $CWD/samba-4.6.16.CVE-2018-14629_16841_16851_16852_16853_16857.diff.gz | patch -p1 --verbose || exit 1 if [ ! -d source3/lib/cmdline ]; then ( cd source3/lib mkdir cmdline cd cmdline ln -sf ../../../source3/include/popt_common.h . ) fi chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ -exec chmod 755 {} \; -o \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; # Some of these options could be auto-detected, but declaring them # here doesn't hurt and helps document what features we're trying to # build in. # # LDFLAGS are needed to avoid problems with missing symbols. LDFLAGS="-Wl,--no-as-needed" \ CFLAGS="$SLKCFLAGS" \ ./configure \ --enable-fhs \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --includedir=/usr/include \ --bindir=/usr/bin \ --sbindir=/usr/sbin \ --mandir=/usr/man \ --sysconfdir=/etc \ --with-configdir=/etc/samba \ --with-piddir=/var/run \ --with-privatedir=/var/lib/samba/private \ --with-privatelibdir=/usr/lib${LIBDIRSUFFIX} \ --with-modulesdir=/usr/lib${LIBDIRSUFFIX} \ --with-lockdir=/var/cache/samba \ --with-logfilebase=/var/log/samba \ --localstatedir=/var \ --enable-cups \ --with-acl-support \ --with-automount \ --with-quotas \ --with-syslog \ --with-utmp \ --with-winbind \ --with-ldap \ --with-ads \ --without-pam \ --build=$TARGET # Gives errors: #--builtin-libraries=replace,ccan \ #--bundled-libraries=heimdal \ # -j options don't seem to work... [Yes they do! At least try to use -j below...] JOBS=6 MAXJOBS=6 export JOBS MAXJOBS make -j $MAXJOBS || make || exit 1 mkdir -p \ $PKG/usr/doc/samba-$VERSION \ $PKG/var/spool/samba \ $PKG/var/log/samba \ $PKG/var/lib/samba/private \ $PKG/var/cache/samba chmod 700 $PKG/var/lib/samba/private chmod 1777 $PKG/var/spool/samba make install DESTDIR=$PKG || exit 1 # Install the smbprint script: install -m0744 packaging/printing/smbprint $PKG/usr/bin/smbprint # Add a sample config file: cat $CWD/smb.conf.default > $PKG/etc/samba/smb.conf-sample # Setup a default lmhosts file: echo "127.0.0.1 localhost" > $PKG/etc/samba/lmhosts.new if [ ! -r $PKG/usr/bin/smbget ]; then rm -f $PKG/usr/share/man/man1/smbget.1 fi # We'll add rc.samba to the init directory, but chmod 644 so that it doesn't # start by default: mkdir -p $PKG/etc/rc.d cat $CWD/rc.samba > $PKG/etc/rc.d/rc.samba.new chmod 644 $PKG/etc/rc.d/rc.samba.new mv $PKG/usr/share/man $PKG/usr gzip -9 $PKG/usr/man/man?/*.? find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null # PAM related stuff we don't use: rm -r $PKG/usr/share/locale rm -f $PKG/usr/man/man8/pam* cp -a \ COPYING* MAINTAINERS Manifest PFIF.txt README* \ Read-Manifest-Now Roadmap WHATSNEW.txt docs examples \ $PKG/usr/doc/samba-$VERSION # These are installed elsewhere: rm -rf $PKG/usr/doc/samba-$VERSION/docs/htmldocs \ $PKG/usr/doc/samba-$VERSION/docs/manpages # Empty now? rmdir $PKG/usr/doc/samba-$VERSION/docs 2> /dev/null # I'm sorry, but when all this info is included in HTML, adding 7MB worth of # PDF files just to have extra artwork is more fluff than I'll agree to. rm -f $PKG/usr/doc/samba-$VERSION/docs/*.pdf # Also redundant also: rm -rf $PKG/usr/doc/samba-$VERSION/docs/docbook mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat << EOF *** Be sure the package contains: drwxr-xr-x 2 root root 4096 May 3 15:46 /var/cache/samba/ drwx------ 2 root root 1024 Mar 12 13:21 /var/lib/samba/private drwxr-xr-x 2 root root 48 Aug 29 13:06 /var/log/samba/ drwxrwxrwt 2 root root 1024 Mar 12 13:21 /var/spool/samba/ EOF cd $PKG /sbin/makepkg -l y -c n $TMP/samba-$VERSION-$ARCH-$BUILD.txz