#!/bin/bash

# Slackware build script for llvm

# Copyright 2008-2016 Heinz Wiesinger, Amsterdam, The Netherlands
# Copyright 2012, 2013, 2014, 2015, 2016, 2018, 2019, 2020, 2021, 2022, 2023, 2024  Patrick J. Volkerding, Sebeka, MN, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

cd $(dirname $0) ; CWD=$(pwd)

PKGNAM=llvm
VERSION=${VERSION:-$(echo llvmorg-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
BUILD=${BUILD:-1_slack15.0}

NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}

if [ -z "$ARCH" ]; then
  case "$( uname -m )" in
    i?86) ARCH=i586 ;;
    arm*) ARCH=arm ;;
       *) ARCH=$( uname -m ) ;;
  esac
fi

# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
# the name of the created package would be, and then exit. This information
# could be useful to other scripts.
if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
  exit 0
fi

TMP=${TMP:-/tmp}
PKG=$TMP/package-$PKGNAM
BUILDDIR=${TMP}/llvm-build-${VERSION}

# Ignore that which should be ignored to avoid long build times and
# massive warning spew:
IGNORE_GNU_EXTENSIONS=${IGNORE_GNU_EXTENSIONS:--Wno-unknown-warning-option -Wno-gnu-line-marker -Wno-gnu-anonymous-struct -Wno-gnu-include-next}

LINKER="lld"

if [ "$ARCH" = "i586" ]; then
  SLKCFLAGS="-O2 -march=i586 -mtune=i686 $IGNORE_GNU_EXTENSIONS"
  LIBDIRSUFFIX=""
elif [ "$ARCH" = "i686" ]; then
  SLKCFLAGS="-O2 -march=i686 -mtune=i686 $IGNORE_GNU_EXTENSIONS"
  LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC $IGNORE_GNU_EXTENSIONS"
  LIBDIRSUFFIX="64"
elif [ "$ARCH" = "alpha" ]; then
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX=""
  LINKER="bfd"
elif [ "$ARCH" = "arm" ]; then
  SLKCFLAGS="-O2 -mfloat-abi=soft"
  LIBDIRSUFFIX=""
  CMAKE_EXTRA=" -DCOMPILER_RT_BUILD_BUILTINS=OFF -DLLVM_HOST_TRIPLE=armv5te-linux-gnueabi -DCMAKE_EXE_LINKER_FLAGS=-latomic -DCMAKE_MODULE_LINKER_FLAGS=-latomic -DCMAKE_SHARED_LINKER_FLAGS=-latomic"
elif [ "$ARCH" = "hppa" ]; then
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX=""
  LINKER="bfd"
elif [ "$ARCH" = "mips" ]; then
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX=""
  CMAKE_EXTRA=" -DCMAKE_EXE_LINKER_FLAGS=-latomic -DCMAKE_MODULE_LINKER_FLAGS=-latomic -DCMAKE_SHARED_LINKER_FLAGS=-latomic"
elif [ "$ARCH" = "mipsel" ]; then
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX=""
  CMAKE_EXTRA=" -DCMAKE_EXE_LINKER_FLAGS=-latomic -DCMAKE_MODULE_LINKER_FLAGS=-latomic -DCMAKE_SHARED_LINKER_FLAGS=-latomic"
elif [ "$ARCH" = "mips64el" ]; then
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX="64"
  CMAKE_EXTRA=" -DLLVM_HOST_TRIPLE=mips64el-linux-gnuabi64"
elif [ "$ARCH" = "or1k" ]; then
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX=""
  CMAKE_EXTRA="-DCMAKE_SHARED_LINKER_FLAGS=-latomic"
  LINKER="bfd"
elif [ "$ARCH" = "ppc" ]; then
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX=""
  CMAKE_EXTRA="-DCMAKE_SHARED_LINKER_FLAGS=-latomic"
  LINKER="bfd"
elif [ "$ARCH" = "riscv64" ]; then
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX="64"
  CMAKE_EXTRA="-DCMAKE_SHARED_LINKER_FLAGS=-latomic"
  LINKER="bfd"
elif [ "$ARCH" = "sh4" ]; then
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX=""
  CMAKE_EXTRA="-DCMAKE_SHARED_LINKER_FLAGS=-latomic"
  LINKER="bfd"
elif [ "$ARCH" = "sparc" ]; then
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX=""
  CMAKE_EXTRA="-DCMAKE_SHARED_LINKER_FLAGS=-latomic"
else
  SLKCFLAGS=${SLKCFLAGS:-"-O2"}
  LIBDIRSUFFIX=${LIBDIRSUFFIX:-""}
  CMAKE_EXTRA=${CMAKE_EXTRA:-""}
  LINKER=${LINKER:-"gold"}
fi

# Building lld will be determined automatically unless BUILD_LLD is
# preset to YES or NO:
if [ -z $BUILD_LLD ]; then
  if [ "$ARCH" =  "or1k" -o "$ARCH" = "sh4" -o "$ARCH" = "alpha" -o "$ARCH" = "hppa" ]; then
    BUILD_LLD=NO
  else
    BUILD_LLD=YES
  fi
fi

# Building lldb will be determined automatically unless BUILD_LLDB is
# preset to YES or NO:
if [ -z $BUILD_LLDB ]; then
  if [ "$ARCH" = "riscv64" -o "$ARCH" = "ppc" -o "${ARCH::4}" = "mips"  -o "$ARCH" =  "or1k" -o "$ARCH" = "sh4" -o "$ARCH" = "alpha" -o "$ARCH" = "hppa" -o "${ARCH::5}" = "sparc" ]; then
    BUILD_LLDB=NO
  else
    BUILD_LLDB=YES
  fi
fi

# Building OpenMP will be determined automatically unless BUILD_OPENMP is
# preset to YES or NO:
if [ -z $BUILD_OPENMP ]; then
  if [ "$ARCH" = "ppc" -o "$ARCH" = "mips" -o "$ARCH" = "mipsel" -o "$ARCH" = "riscv64" -o "$ARCH" = "s390x" -o "$ARCH" =  "or1k" -o "$ARCH" = "sh4" -o "$ARCH" = "alpha" -o "$ARCH" = "hppa" -o "${ARCH::5}" = "sparc" ]; then
    # OpenMP not supported on PowerPC 32 bits / RISC-V / zArchitecture
    BUILD_OPENMP=NO
  else
    BUILD_OPENMP=YES
  fi
fi

# Building Host clang will be determined automatically unless BUILD_HOST is
# preset to YES or NO:
if [ -z $BUILD_HOST ]; then
  if [ "$ARCH" = "sh4" -o "$ARCH" = "or1k" -o "$ARCH" = "hppa" -o "$ARCH" = "alpha" ]; then
    # clang not supported on sh4, or1k, hppa, alpha
    BUILD_HOST=NO
  else
    BUILD_HOST=YES
  fi
fi

if [ -z $BUILD_BOLT ]; then
  if [ "$ARCH" = "x86_64" -o "$ARCH" = "aarch64" ]; then
    BUILD_BOLT=YES
  else
    BUILD_BOLT=NO
  fi
fi

if [ -z $BUILD_FLANG ]; then
  if [ `gcc -dM -E - < /dev/null | grep -c __LP64__` -eq 0 -o "$BUILD_HOST" = "NO" ]; then
    # flang not supported on 32-bit CPUs
    BUILD_FLANG=NO
  else
    if [ "$ARCH" = "mips64el" -o "$ARCH" = "s390x" ]; then
      BUILD_FLANG=NO
    else
      BUILD_FLANG=YES
    fi
  fi
fi


LLVM_ENABLE_PROJECTS="llvm;mlir"

if [ "$BUILD_HOST" = "YES" ]; then
  ADD_HOST="host;"
  # Select projects to build:
  LLVM_ENABLE_PROJECTS="${LLVM_ENABLE_PROJECTS};compiler-rt;clang;clang-tools-extra;polly"
  # Select runtimes to build:
  LLVM_ENABLE_RUNTIMES=${LLVM_ENABLE_RUNTIMES:-"libcxx;libcxxabi"}
else
  ADD_HOST=""
  # Select projects to build:
  LLVM_ENABLE_PROJECTS="${LLVM_ENABLE_PROJECTS};clang"
fi

if [ "$BUILD_LLD" = "YES" ]; then
  LLVM_ENABLE_PROJECTS="${LLVM_ENABLE_PROJECTS};lld"
fi

if [ "$BUILD_LLDB" = "YES" ]; then
  LLVM_ENABLE_PROJECTS="${LLVM_ENABLE_PROJECTS};lldb"
fi

if [ "$BUILD_OPENMP" = "YES" ]; then
  LLVM_ENABLE_PROJECTS="${LLVM_ENABLE_PROJECTS};openmp"
fi

if [ "$BUILD_BOLT" = "YES" ]; then
  LLVM_ENABLE_PROJECTS="${LLVM_ENABLE_PROJECTS};bolt"
fi

if [ "$BUILD_FLANG" = "YES" ]; then
  LLVM_ENABLE_PROJECTS="${LLVM_ENABLE_PROJECTS};flang"
fi

# Python3 short version:
PY3=$(python3 -c 'from distutils.sysconfig import get_python_lib; print(get_python_lib())' | cut -f 2 -d n | cut -f 1 -d /)

rm -rf $PKG $BUILDDIR
mkdir -p $TMP $PKG $BUILDDIR
cd $BUILDDIR

# Add a fake configure script so the cleanup script used here at Slackware
# knows to delete this stuff later. Other folks can just ignore this... it
# doesn't have any other purpose.
touch configure
chmod 755 configure

echo "Extracting $CWD/llvmorg-$VERSION.tar.?z..."
tar xf $CWD/llvmorg-$VERSION.tar.?z || exit 1
cd llvm-project-llvmorg-$VERSION || cd llvmorg-$VERSION || exit 1

# Support GCC built for i?86-slackware-linux:
zcat $CWD/clang.toolchains.32-bit.triple.diff.gz | patch -p2 --verbose || exit 1

# Patch arm: soft float, invalid conversion from unwind state:
zcat $CWD/arm_soft.diff.gz | patch -p1 --verbose || exit 1
zcat $CWD/unwind_state_invalid_conversion.diff.gz | patch -p1 --verbose || exit 1

if [ "${ARCH::3}" = "arm" ]; then
  # Re-enabling system libunwind, since it searches for aeabi_unwind* function that are
  # not present in bundled one
  zcat $CWD/arm_enable_system_libunwind.diff.gz | patch -p1 --verbose || exit 1
fi

if [ "$ARCH" = "mips" -o "$ARCH" = "mipsel" ]; then
  # Disabling FLOAT16, since it requires mips64 instructions
  zcat $CWD/mips_disable_float16.diff.gz | patch -p1 --verbose || exit 1
fi

if [ "$BUILD_HOST" = "NO" ]; then
  # Disabling arch/triple autodetection, since it does not work without host target
  zcat $CWD/disable_default_arch_detect.diff.gz | patch -p1 --verbose || exit 1
fi

# Patch riscv64: AllWinner D1 does not have fence.tso instruction:
zcat $CWD/riscv64-no-fence.tso.diff.gz | patch -p1 --verbose || exit 1

# Patch alpha: Fix invalid variable name __alpha:
zcat $CWD/alpha_fix_variable_name.diff.gz | patch -p1 --verbose || exit 1

# Add new architectures (loongarch64, or1k, etc...) to cmake config.guess and config-ix.cmake:
\cp /usr/share/libtool/build-aux/config.* llvm/cmake/
zcat $CWD/newarchs.diff.gz | patch -p1 --verbose || exit 1

# Fix incorrect sanitizer data structures for enabled 64bit time_t on 32bit architectures:
zcat $CWD/sanitizer_time64.diff.gz | patch -p1 --verbose || exit 1


chown -R root:root .
find . \
  \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 -o -perm 511 \) \
  -exec chmod 755 {} \+ -o \
  \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \+

# In bootstrap system, or for architectures that does not support host llvm,
# clang is not yet available or it could not compile c(++) sources, use gcc
which clang 2> /dev/null
if [ $? -eq 0 -a `file -L $(which clang) | grep -c 'shell script'` -eq 0 ]
then
  C_COMPILER="clang"
  CXX_COMPILER="clang++"
else
  C_COMPILER="gcc"
  CXX_COMPILER="g++"
  LINKER="bfd"
fi

SLKCFLAGS="$SLKCFLAGS $IGNORE_GNU_EXTENSIONS"

mkdir build
cd build
  cmake -GNinja \
    -DCMAKE_C_COMPILER="$C_COMPILER" \
    -DCMAKE_CXX_COMPILER="$CXX_COMPILER" \
    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
    -DCMAKE_INSTALL_PREFIX=/usr \
    -DLLVM_LIBDIR_SUFFIX=${LIBDIRSUFFIX} \
    -DCMAKE_BUILD_TYPE=Release \
    -DLLVM_BUILD_LLVM_DYLIB=ON \
    -DLLVM_LINK_LLVM_DYLIB=ON \
    -DCLANG_LINK_CLANG_DYLIB=ON \
    -DLLVM_USE_LINKER=$LINKER \
    -DLLVM_ENABLE_PROJECTS="$LLVM_ENABLE_PROJECTS" \
    -DLLVM_ENABLE_RUNTIMES="$LLVM_ENABLE_RUNTIMES" \
    -DLLVM_ENABLE_RTTI=ON \
    -DLLVM_ENABLE_FFI=ON \
    -DLLVM_ENABLE_ZLIB=ON \
    -DLLVM_ENABLE_ASSERTIONS=OFF \
    -DLLVM_ENABLE_PER_TARGET_RUNTIME_DIR=NO \
    -DLLVM_INSTALL_UTILS=ON \
    -DLLVM_BINUTILS_INCDIR=/usr/include \
    -DCLANG_RESOURCE_DIR="../lib${LIBDIRSUFFIX}/clang/$(echo $VERSION | cut -f 1 -d .)" \
    -DLLVM_TARGETS_TO_BUILD="${ADD_HOST}AMDGPU;BPF;WebAssembly" \
    $CMAKE_EXTRA \
    -DLLVM_INCLUDE_BENCHMARKS=OFF \
    -DCOMPILER_RT_BUILD_LIBFUZZER=OFF \
    -DCLANG_DEFAULT_PIE_ON_LINUX=ON \
    -DLIBCXX_LIBDIR_SUFFIX=${LIBDIRSUFFIX} \
    -DLIBCXXABI_LIBDIR_SUFFIX=${LIBDIRSUFFIX} \
    -DLIBCXX_INCLUDE_BENCHMARKS=OFF \
    -DLIBCXX_ENABLE_ABI_LINKER_SCRIPT=ON \
    -DLIBCXXABI_USE_LLVM_UNWINDER=OFF \
    ../llvm  || exit 1
  "${NINJA:=ninja}" $NUMJOBS || exit 1
  DESTDIR=$PKG "$NINJA" install || exit 1
cd ..

case "$ARCH" in
  arm) TARGET=$ARCH-slackware-linux-gnueabi ;;
  armv7hl) TARGET=$ARCH-slackware-linux-gnueabihf ;;
  mips64el) TARGET=$ARCH-slackware-linux-gnueabi64 ;;
     *) TARGET=$ARCH-slackware-linux ;;
esac

# Add symlinks for $ARCH-slackware-linux-{clang,clang++}:
( cd $PKG/usr/bin
  ln -sf clang $TARGET-clang
  ln -sf clang++ $TARGET-clang++
)

# Add clang target if host clang not built:
if [ "$BUILD_HOST" = "NO" ]; then
( cd $PKG/usr/bin
  SHORTVER=`echo clang-[0-9][0-9] | sed 's/clang-//'`
  mv clang-$SHORTVER clang-$SHORTVER.orig
  cat $CWD/clang.target | sed "s/-XX/-$SHORTVER/g" > clang-$SHORTVER
  chmod 755 clang-$SHORTVER
)
fi

# Install clang-static-analyzer:
for i in ccc c++; do
  ln -s /usr/libexec/$i-analyzer \
    $PKG/usr/bin/$i-analyzer || exit 1
done

# Ensure lit-cpuid is installed:
if [ ! -r $PKG/usr/bin/lit-cpuid ]; then
  cp -a build/bin/lit-cpuid $PKG/usr/bin/lit-cpuid
  chown root:root $PKG/usr/bin/lit-cpuid
  chmod 755 $PKG/usr/bin/lit-cpuid
fi

# Remove symlink to libgomp, which is already provided by gcc:
rm -f $PKG/usr/lib$LIBDIRSUFFIX/libgomp.so

# Install Python bindings:
for pyver in ${PY3}; do
  mkdir -p "$PKG/usr/lib$LIBDIRSUFFIX/python$pyver/site-packages"
  cp -a clang/bindings/python/clang "$PKG/usr/lib$LIBDIRSUFFIX/python$pyver/site-packages/"
done

# Remove bundled python-six:
rm -f "$PKG/usr/lib$LIBDIRSUFFIX/python2*/site-packages/six.py"

# Compile Python scripts:
python3 -m compileall "$PKG/usr/lib$LIBDIRSUFFIX/python${PY3}/site-packages/clang"
python3 -O -m compileall "$PKG/usr/lib$LIBDIRSUFFIX/python${PY3}/site-packages/clang"
python3 -m compileall "$PKG/usr/share/scan-view"
python3 -O -m compileall "$PKG/usr/share/scan-view"
python3 -m compileall "$PKG/usr/share/clang"
python3 -O -m compileall "$PKG/usr/share/clang"
python3 -m compileall "$PKG/usr/share/opt-viewer"
python3 -O -m compileall "$PKG/usr/share/opt-viewer"

# Nevermind, we're not shipping this python2 crap:
rm -rf $PKG/usr/lib$LIBDIRSUFFIX/python2*

# Move man page directory:
mv $PKG/usr/share/man $PKG/usr/

# Strip binaries:
( cd $PKG
  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
)

# Compress manual pages:
find $PKG/usr/man -type f -exec gzip -9 {} \+
for i in $( find $PKG/usr/man -type l ) ; do
  ln -s $( readlink $i ).gz $i.gz
  rm $i
done

# Just copy anything top or next level that looks like it might be docs.
# Maybe we'll include it someday. ;-)
mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
cp -a *.{txt,md,TXT,rst} $PKG/usr/doc/$PKGNAM-$VERSION
cp -a --parents */*.{txt,md,TXT,rst} $PKG/usr/doc/$PKGNAM-$VERSION
cp -a --parents */README* $PKG/usr/doc/$PKGNAM-$VERSION
find $PKG/usr/doc/$PKGNAM-$VERSION -name CMakeLists.txt -exec rm -f "{}" \;
rmdir $PKG/usr/doc/$PKGNAM-$VERSION/* 2> /dev/null

mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc

cd $PKG
/sbin/makepkg -l y -c n --remove-rpaths $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz