#!/bin/sh # Copyright 2005-2016 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is # permitted provided that the following conditions are met: # # 1. Redistributions of this script must retain the above copyright # notice, this list of conditions and the following disclaimer. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO # EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, # PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; # OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # Modified 2011 by Eric Hameleers for ARM port. PKGNAM=binutils VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-3} CROSS32=0 if echo "$*" | grep -qw -- --cross32 ; then PKGNAM=$PKGNAM-cross32 CROSS32=1 fi # Automatically determine the architecture we're building on: MARCH=$( uname -m ) if [ -z "$ARCH" ]; then case "$MARCH" in i?86) export ARCH=i586 ;; armv7hl) export ARCH=$MARCH ;; arm*) export ARCH=arm ;; # Unless $ARCH is already set, use uname -m for all other archs: *) export ARCH=$MARCH ;; esac fi NUMJOBS=${NUMJOBS:-" -j7 "} # Uncomment this to include the experimental gold linker: GOLD=" --enable-gold=yes --enable-ld=default " # Set to ld.gold or ld.bfd: DEFAULT_LD=ld.bfd # The --enable-initfini-array option was added in binutils-2.21.51.0.3. # This option currently causes a world of hurt trying to compile glibc, # and might break static libraries or cause other ill effects. There # is an upstream patch for glibc but it does not avoid all of the known # problems (and there may be some unknown ones, too), so we will avoid # introducing this feature for now. # References: # http://sourceware.org/bugzilla/show_bug.cgi?id=12343 # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=46770 NO_INITFINI=" --disable-initfini-array " TARCH=$ARCH if [ "$ARCH" = "i586" ]; then SLKCFLAGS="-O2 -march=i586 -mtune=i686" # The config option below is currently needed to compile on x86: WERROR="--enable-werror=no" LIBDIRSUFFIX="" elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" # The config option below is currently needed to compile on x86: WERROR="--enable-werror=no" LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" elif [ "$ARCH" = "armv7hl" ]; then SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16" LIBDIRSUFFIX="" elif [ "$ARCH" = "aarch64" ]; then if [ $CROSS32 -eq 0 ]; then SLKCFLAGS="-O2" LIBDIRSUFFIX="64" else SLKCFLAGS="-O2" LIBDIRSUFFIX="" TARCH="armv7hl" fi else SLKCFLAGS=${SLKCFLAGS:-"-O2"} LIBDIRSUFFIX=${LIBDIRSUFFIX:-""} TARCH=${TARCH:-"$ARCH"} fi case "$TARCH" in arm*) TARGET=$TARCH-slackware-linux-gnueabi ;; *) TARGET=$TARCH-slackware-linux ;; esac CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-binutils rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf binutils-$VERSION tar xvf $CWD/binutils-$VERSION.tar.xz || \ tar xvf $CWD/binutils-$VERSION.tar.bz2 || exit 1 cd binutils-$VERSION # Various upstream patches: zcat $CWD/patches/binutils-2.20.51.0.2-libtool-lib64.patch | patch -p1 --verbose || exit 1 zcat $CWD/patches/binutils-2.20.51.0.10-ppc64-pie.patch | patch -p1 --verbose || exit 1 zcat $CWD/patches/binutils-2.25-version.patch | patch -p1 --verbose || exit 1 zcat $CWD/patches/binutils-2.25-set-long-long.patch | patch -p1 --verbose || exit 1 zcat $CWD/patches/binutils-2.20.51.0.10-copy-osabi.patch | patch -p1 --verbose || exit 1 zcat $CWD/patches/binutils-2.20.51.0.10-sec-merge-emit.patch | patch -p1 --verbose || exit 1 zcat $CWD/patches/binutils-2.22.52.0.1-relro-on-by-default.patch | patch -p1 --verbose || exit 1 zcat $CWD/patches/binutils-2.23.52.0.1-addr2line-dynsymtab.patch | patch -p1 --verbose || exit 1 zcat $CWD/patches/binutils-2.24-ldforcele.patch | patch -p1 --verbose || exit 1 zcat $CWD/patches/binutils-2.25.1-cleansweep.patch | patch -p2 --verbose || exit 1 zcat $CWD/patches/binutils-2.26-formatting.patch | patch -p2 --verbose || exit 1 zcat $CWD/patches/binutils-2.26-fix-compile-warnings.patch | patch -p1 --verbose || exit 1 zcat $CWD/patches/binutils-2.26-Bsymbolic_PIE.patch | patch -p1 --verbose || exit 1 zcat $CWD/patches/binutils-2.26-lto.patch | patch -p1 --verbose || exit 1 zcat $CWD/patches/binutils-rh1312151.patch | patch -p1 --verbose || exit 1 zcat $CWD/patches/binutils-2.26-fix-GOT-offset-calculation.patch | patch -p1 --verbose || exit 1 # Export the demangle.h header file: zcat $CWD/patches/binutils.export.demangle.h.diff.gz | patch -p1 --verbose || exit 1 # Don't check to see if "config.h" was included in the installed headers: zcat $CWD/patches/binutils.no-config-h-check.diff.gz | patch -p1 --verbose || exit 1 # Fix 64bit default target for mips sed -i 's/mips64\*el-\*-linux-\*)\ttarg_emul=elf32ltsmipn32/mips64\*el-\*-linux-\*)\ttarg_emul=elf64ltsmip/' ld/configure.tgt sed -i 's/mips64\*-\*-linux-\*)\ttarg_emul=elf32btsmipn32/mips64\*-\*-linux-\*)\ttarg_emul=elf64btsmip/' ld/configure.tgt chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ -exec chmod 755 {} \; -o \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; # End of preparations if echo "$*" | grep -qw -- --prep ; then exit 0 fi # Build for an x86 glibc2-based Linux system: if [ $CROSS32 -eq 0 ]; then CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --mandir=/usr/man \ --infodir=/usr/info \ --with-docdir=/usr/doc/binutils-$VERSION \ --enable-shared \ --enable-multilib \ --enable-64-bit-bfd \ --enable-plugins \ --enable-threads \ --enable-targets=i386-efi-pe,${TARGET} \ --enable-install-libiberty \ $GOLD \ $NO_INITFINI \ $WERROR \ --build=$TARGET \ || exit 1 else ./configure \ --prefix=/usr \ --libdir=/usr/lib$LIBDIRSUFFIX \ --enable-static \ --target=$TARGET \ || exit 1 fi make clean || exit 1 make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 if [ $CROSS32 -eq 0 ]; then # Differentiate between BSD strings and GNU strings ( cd $PKG/usr/bin ; mv strings strings-GNU ) ( cd $PKG/usr/man/man1 ; mv strings.1 strings-GNU.1 ) # Move ldscripts to /usr/lib${LIBDIRSUFFIX}, and then put symlinks in place mv $PKG/usr/${TARGET}/lib/ldscripts $PKG/usr/lib${LIBDIRSUFFIX} ( cd $PKG/usr/${TARGET} ln -s /usr/lib${LIBDIRSUFFIX}/ldscripts lib/ldscripts for FILE in ar as ld ld.bfd ld.gold nm objcopy objdump ranlib strip ; do if [ -r "/usr/bin/$FILE" ]; then rm -f bin/$FILE ln -s /usr/bin/$FILE bin/$FILE fi done ) # If the requested default linker is present, make it the default: # Set the link differently on the system to change the default at runtime. if [ -r $PKG/usr/bin/$DEFAULT_LD ]; then ( cd $PKG/usr/bin ; rm -f ld ; ln -sf $DEFAULT_LD ld ) fi fi # CROSS32 find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null if [ $CROSS32 -eq 0 ]; then # Remove some unneeded man pages, and then compress the rest rm -f $PKG/usr/man/man1/{dlltool,windres}.1 ( cd $PKG/usr/man find . -type f -exec gzip -9 {} \; for i in $(find . -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done ) # Compress info pages rm -f $PKG/usr/info/dir gzip -9 $PKG/usr/info/* mkdir -p $PKG/usr/doc/binutils-$VERSION cp \ $CWD/release.binutils-* \ COPYING* ChangeLog.linux MAI* README* \ $PKG/usr/doc/binutils-$VERSION # If there's a ChangeLog, installing at least part of the recent history # is useful, but don't let it get totally out of control: if [ -r ChangeLog ]; then DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog touch -r ChangeLog $DOCSDIR/ChangeLog fi chown -R root:root $PKG/usr/doc/binutils-$VERSION else # CROSS32 # Remove man/info/locale: rm -rf $PKG/usr/share fi # CROSS32 # Add slack-desc: mkdir -p $PKG/install cat $CWD/slack-desc | sed "s/^binutils/$PKGNAM/" > $PKG/install/slack-desc cd $PKG /sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz cat << EOF ############################# oprofile links to libbfd so be sure to recompile that ############################# EOF